Fedora Arm Secondary Architecture/Storage performance
From CDOT Wiki
Contents
Goal
To test the performance of various storage solutions for the ARM hardware devices.
Performance Results
USB PATA
Version 1.03e ——Sequential Output—— –Sequential Input- –Random- -Per Chr- –Block– -Rewrite- -Per Chr- –Block– –Seeks– Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP fedora-arm 2G 5768 96 28790 24 12380 11 5936 96 25991 10 121.0 0 ——Sequential Create—— ——–Random Create——– -Create– –Read— -Delete– -Create– –Read— -Delete– files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 12640 97 +++++ +++ 22387 99 10765 82 +++++ +++ 21615 100 fedora-arm,2G,5768,96,28790,24,12380,11,5936,96,25991,10,121.0,0,16,12640,97,+++++,+++,22387,99,10765,82,+++++,+++,21615,100
NFS
Version 1.03e ——Sequential Output—— –Sequential Input- –Random- -Per Chr- –Block– -Rewrite- -Per Chr- –Block– –Seeks– Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP fedora-arm 2G 5605 92 43362 16 20478 53 5619 98 51789 85 1201 35 ——Sequential Create—— ——–Random Create——– -Create– –Read— -Delete– -Create– –Read— -Delete– files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 50 0 3480 27 55 1 49 0 3948 26 53 0 fedora-arm,2G,5605,92,43362,16,20478,53,5619,98,51789,85,1200.7,35,16,50,0,3480,27,55,1,49,0,3948,26,53,0
iSCSI
Version 1.03e ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP fedora-arm 2G 4923 82 31503 30 1827 3 5537 96 59147 84 2514 44 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 11785 92 +++++ +++ 21841 99 12533 98 +++++ +++ 21201 100 fedora-arm,2G,4923,82,31503,30,1827,3,5537,96,59147,84,2514.5,44,16,11785,92,+++++,+++,21841,99,12533,98,+++++,+++,21201,100
Summary
Write
Transfer Speed | Percentage Increase | CPU Usage | Percentage Increase | |
---|---|---|---|---|
PATA | 28,790 KB/s | 0% | 24% | 0% |
NFS | 43,363 KB/s | 50% | 16% | -50% |
iSCSI | 31,503 KB/s | 9% | 30% | 25% |
Read
Transfer Speed | Percentage Increase | CPU Usage | Percentage Increase | |
---|---|---|---|---|
PATA | 25,991 KB/s | 0% | 10% | 0% |
NFS | 51,789 KB/s | 99% | 85% | 850% |
iSCSI | 59,147 KB/s | 127% | 84% | 840% |
iSCSI
Initiator config
Host is OpenRD
- Install the iscsi-initiator-utils package.
- Placed "InitiatorName=iqn.2000-10.ca.on.senecac.hongkong" in /etc/iscsi/initiatorname.iscsi
- Start the iscsi and iscsid services.
- Discover the remote targets: iscsiadm -m discovery -t sendtargets -p hongkong:3260
- List the targets: iscsiadm -m node -- the remote target(s) should be shown.
- Login to the targets: iscsiadm -m node -l
- You will now have an additional scsi disk device. Use this as one element of a RAID-1 array, using local storage (an LV or a looped-back file) as the other element.
- Mount the new RAID-1 array and create a filesystem on it. Place some files there.
- Unmount the filesystem, stop the array, log out of the iSCSI disk (iscsiadm -m node -u).
- Verify that the filesystem can be locally read on the machine hosting the target.
PATA/USB Config
- PATA drive connected via USB
- Device is /dev/sda1 if no other storage is connected
Target Config
- Host is HongKong
- IQN is "InitiatorName=iqn.2000-10.ca.on.senecac.hongkong"
- Target is "target0" which is connected to the LV HongKong/arm1iscsi, size 100GB
Results
See Fedora ARM Secondary Architecture/iSCSI for note on problems encountered using iSCSI.